Welcome to our Support Portal. Search for answers using the search box below, or create a support ticket if you cannot find your answer.
Installing S.lilley Brand E14 Lampholder’s
This guide is to aid you in installing the S.Lilley brand SES | E14 | Small Edison Screw lampholders.
Â
Step 2
Take the connection unit and wire it as shown below, note the location of the live and neutral this is crucial.
- Live (Brown Wire)
- Neutral (Blue Wire)
- Earth (Green/Yellow Wire)
Step 3
Carefully sit the connection unit into the cap of the lampholder, taking care not to trap any wires.
Note there is a notch on the connection unit that will need to be located into the cap, this will only go one way.
Â
Step 4
Take the black isolator that is inside the skirt (if it has not already fallen out) and place it over the top of the connection unit as shown below.
Â
Step 5
Step 6
After ensuring the 4 notches are still aligned carefully tighten the skirt unit by threading it onto the cap, you will hear and feel a clicking noise this is normal and is the locking barb engaging.
Keep threading until the skirt has hit the bottom of the thread.
Â
